24/7 call-out service

Have a question?

Emergency Plumbing Materials

A Place you can rely on when it comes to a stock of plumbing materials in an emergency

Welcome to emergency plumbing materials, the place to find out what stock is reasonable to carry by the customer and by the emergency plumbing engineer carrying the plumbing stock by Martin Smith of EPHG Limited. If you like this, you will also like our Emergency Plumbing Tools page where we have a link to the advanced emergency plumbing tools.


Here is where we explain a little about the video and about what is reasonable to stock when it comes to emergency plumbing materials

Pushfit Fittings (Speedfit)

Emergency Plumbing Materials
  • 10mm Speedfit staights x4.
  • 10mm Speedfit bends x4.
  • 10mm Speedfit stem bends x4.
  • 10mm Speedfit tees x2.
  • 15mm Speedfit staights x8.
  • 15mm Speedfit bends x8.
  • 15mm Speedfit stem bends x4.
  • 15mm Speedfit tees x2.
  • 15mm Speedfit blanks x6.
  • 15mm Speedfit tap connectors x4.
  • 15mm Speedfit flexi tap connectors x2.
  • 15mm Speedfit flexi pipe x2.
  • 22mm Speedfit staights x4.
  • 22mm Speedfit bends x4.
  • 22mm Speedfit tees x2.
  • 22mm Speedfit blanks x4.
  • 22mm Speedfit reducer to 15mm x2.
  • 28mm Speedfit staights x2.
  • 28mm Speedfit bends x2.
  • 15mm Speedfit isolation Valves x8.
  • 22mm Speedfit isolation Valves x2.
  • 10mm Speedfit pipe x 2 meters.
  • 15mm Speedfit pipe x 3 meters.
  • 22mm Speedfit pipe x 2 meters.

Compression Fitting

  • 5lb lead lock x3.
  • 6lb lead lock x3.
  • 7lb lead lock x6.
  • 8lb lead lock x3.
  • 9lb lead lock x3.
  • 8mm Compression couplings x2.
  • 8mm Compression bends x2.
  • 8mm Compression tees x2.
  • 8mm Compression blanks x1.
  • 10mm Compression couplings x4.
  • 10mm Compression bends x2.
  • 10mm Compression tees x2.
  • 15mm Compression couplings x8.
  • 15mm Compression bends x8.
  • 15mm Compression tees x2.
  • 15mm compression blanks x8.
  • 3/4-Inch Couplings x2.
  • 22mm Compression couplings x4.
  • 22mm Compression bends x2.
  • 22mm Compression tees x2.
  • 22mm Compression reducer to 15mm x1.
  • 28mm Compression staights x2.
  • 15mm Isolation valves x8.
  • 22mm Isolation valves x1.
  • 15mm Mains stop valve x1.
  • 22mm Mains stop valve x1.
  • 15mm Gate valve x1.
  • 22mm Gate valve x1.
  • 22mm Pump valves set x1.
  • 15mm Washing machine valves x4.
  • 15mm Back plate and bib taps x1.
  • 8mm Radiator valve includes drain off x1.
  • 10mm Radiator valve includes drain off x1.
  • 15mm Radiator valve includes drain off x1.
  • 15 Thermostatic vadiator valve and raducers x1.
  • 15mm Filling Loop (Flexi, 2x Blanks, Non return valve + Isolation Valve) x1.
  • PTFE x2.

Solder Fittings

  • 8mm End feed copper couplings x2.
  • 8mm End feed copper bends x2.
  • 8mm End feed copper tees x2.
  • 8mm End feed copper blanks x1.
  • 10mm End feed copper couplings x2.
  • 10mm End feed copper bends x2.
  • 10mm End feed copper tees x2.
  • 10mm End feed copper reducer x1.
  • 15mm End feed copper couplings x4.
  • 15mm End feed copper bends x4.
  • 15mm End feed copper tees x2.
  • 15mm End feed copper reducer to 10mm x1.
  • 15mm End feed copper tap connector x2.
  • 22mm End feed copper couplings x4.
  • 22mm End feed copper bends x2.
  • 22mm End feed copper tees x2.
  • 22mm End feed copper reducer to 10mm x1.
  • 22mm End feed copper tap connector x2.
  • 22mm End feed copper to old 3/4 x2.
  • 28mm End feed copper couplings x2.
  • 28mm End feed copper bends x1.
  • 10mm Copper pipe pipe x2 meters.
  • 15mm Copper pipe pipe x6 meters.
  • 22mm Copper pipe pipe x4 meters.
  • 28mm Copper pipe pipe x1 meter.

Diaphram Washers

  • Siamp Diaphragm Washer.
  • Fluidmaster Standard Seal.
  • Torbeck Diaphragm Washer.
  • Hushflo Diaphragm Washer.
  • Wisa Diaphragm Washer.
  • Ballvalve Diaphragm Washer.
  • Wirquin Diaphragm Washer.
  • Hydroflo Diaphragm Washer.
  • Ballvalve Stem Washer.
  • Ballvalve Washer.

General Washers

  • O rings washers (100 or more different sizes) including Imperial & Metric.
  • Poly Washers.
  • Barking Grohe Washer.
  • Delta Tap Washer.
  • Standard Doughnut Washer.
  • Draw Off Cock Washer.
  • Mix Fibre Washers.
  • Mix of Tap Washers.
  • Emersion Heater Washer.
  • Pegler Washer.
  • Shower Hose Washer.
  • Universal Top Hat Washer.
  • Supa Tap Washer.
  • Flat Tap Washer.
  • Dome Tap Washer.
  • Tantofex Washer.
  • Trap Inlet Washer.
  • Trap Sealing Rings.

Broken Toilet Emergency

  • Complete Selection of Emergency Washers.
  • Selection of back plates & Donut Washers.
  • 7 to 8-Inch Toilet Syphon.
  • Toilet Hook Small, Mediam and Long.
  • Overflow.
  • Under Water Setting Silicone.
  • Toilet Handle.
  • Plastic toilet handle lever.
  • Open Flush Lever Syphon.
  • Range of Wing-nuts & screws.
  • Ball Type Float.
  • Adjustable Ball Type Float Valve.
  • Torbech Valves Bottom Entry Adjustable x2.
  • Torbech Valve Side Entry x1.
  • Speedfit Tap Connector.
  • 15mm Speedfit Isolation Valve.
  • Water Spills Container.
  • Toilet Overflow Blank.
  • Selection of Multikwik Pan Connectors.
  • Narrow Toilet Float Operation Valve.

Leaking Tank

  • 15 and 22mm Part 2 Ball Valve plus float.
  • 15 and 22mm Pipe.
  • Solvent cement glue.
  • Plumbers gold.
  • Emergency Washers.
  • Speedfit.
  • Compression.
  • Lagging

Outside

  • 25mm MDPE straight x1.
  • 25mm MDPE bend x1.
  • 25mm MDPE to 22mm x1.
  • 20mm MDPE straight x1.
  • 20mm MDPE bend x1.
  • 20mm MDPE to 15mm x1.
  • MDPE Inserts.
  • 1 meter of MDPE pipe.
  • Set of lead lock fittings.
  • Bib Tap (non-return).
  • Back Plate.
  • 15mm Lagging.
  • Weather proof silicone.
  • 15mm Compression Blanks.

Central Heating

  • The Grundfos Alpha 2 15/50 Pump.
  • Central Heating Pump Gate Valves.
  • Spare Pump Valve Washers.
  • 2 and 3 way diverter valve.
  • 8, 10, 15mm Thermostatic Radiator Valves.
  • 8, 10, 15mm Radiator drain off valves.
  • Top entry emersion Heater plus spare stat.
  • Side entry emersion Heater plus spare stat.
  • 15 and 22mm Gate Valves.
  • Bleed nipples.
  • PTFE.
  • 8, 10, 15mm Pipe.
  • Emergency Solder Fittings.
  • Emergency Push Fit Materials.
  • Emergency Compression Fittings.
  • Leak sealing fluid.
  • Fluid for a better central heating flow.
  • Auto Air Vent Valve.
  • Central heating air vent blank.